Owner Manual

Remove the existing toilet seat
and insert the rubber anchors
into the mounting holes.
1. Attaching the rubber anchors
rubber anchors
mounting holes
Place the catch plate and guides over
the mounting holes. Insert the mounting
screw and secure the catch plate to
the toilet.
2. Attaching the mounting plate
mounting plate
mounting screw guide rubber anchor
3. Attaching the bidet seat
Slide the bidet seat all the
way on to the catch plate.
release button
4. Seat sensor
This appliance is equipped with
a seat sensor and will not
function unless occupied.
seat sensor
5. Connecting the water hose
water supply
hose (7/8”)
bidet supply
hose (1/2”)
t-valve
water tank
shutoff valve
bidet seat
Close the water shutoff valve.
Flush the toilet to empty the tank.
Remove the existing water supply hose
from the tank.
Install the t-valve on to the tank.
Connect the 7/8” water supply hose to the water
shutoff valve and t-valve. If necessary, use the
included conversion nut.
Connect the 1/2” water supply hose to
the bidet seat and t-valve.
Open the water shutoff valve.
Check for any leaking or dripping.
conversion nut
(optional)
SEAT INSTALLATION GUIDE
2