Owner Manual

a. Drill two 6mm holes on the wall
that line up with the remote bracket.
b. Install the wall anchors in the
newly drilled holes.
c. Place the remote bracket
over the wall anchors.
d. Use the provided screws to attach the
remote control bracket to the wall.
e. Place the remote control on the bracket.
a. Unplug the bidet seat.
b. Press and hold the "STOP" button on the
remote until the indicator lights flash.
c. Put the remote close to the bidet
seat and plug it back in.
d. The indicator lights will stop flashing
when the remote has successfully paired.
REMOTE INSTALLATION GUIDE
3
1. Installation
2. Remote Pairing
(Follow these instructions if the bidet seat is not responding to the remote)