Owner Manual

12
PREPARATION
2
Please plug the power cord into AC120V power outlet.
Plug the unit into the proper power source and the LED power light will start flashing.
Wait until the LED power light stops flashing and becomes solid red.
The water tank will be filled after pushing a "wash" or , or ) button.
When the water tank is filling the buzzer "Beeps"continuously.
After the water tank is full the buzzer will end with "One Solid Beep".
Check for any water leaks.
1
Please turn on the water supply valve and check connected spots(1~5) for the leakage.
4
Operation
(Basic)
CAUTION
Please press the "off"or "low"button to reduce the seat temperature after using.
Special precautions should be taken for children, those who cannot adjust the temperature,
and those who have sensitive skin.
CAUTION
CAUTION
DO NOT ALLOW CHILDREN TO USE THE TURBO WASH or VORTEX WASH FUNCTION!
SUPERVISION IS STRONGLY RECOMMENDED FOR THE ELDERLY OR OTHER PERSONS
THAT MAY HAVE LIMITATIONS IN BODY MOVEMENT, ILLNESS OR DISABILITIES!
Observe at all times
water supply
vavle
171102_BB-1700,2000 USER's MANUAL.indd 12 2017-11-03 오전 11:28:06