Owner Manual
18
CAUTION BEFORE INSTALLATION
ᆞDo not plug in before installation.
ᆞ
I f you need an electric power system or extension, please consult a qualified electrician.
ᆞPlease contact our service center(847-458-2334) when you want to reinstall the bidet
product(move or replacement).
STEPS
ᆞShut off the water supply shut off valve.
ᆞDrain the toilet tank completely.
ᆞThen remove the existing fill valve water supply hose.
Flexible Tube
Water supply hose
(for toilet flush water tank)
1
Connect T-Valve.
ᆞRemove existing supply hose connected to the toilet tank.
Make sure not to damage the water supply hose
ᆞ
Install T-Valve at the thread from tank.
ᆞRemove existing supply tube from fresh tank
ᆞIf your shut off valve is
1/2"
O.D compression size,
use supplied
1/2"
conversion nut as shown below.
2
Removing the existing seat and lid.
ᆞRemove mounting bolts to release existing
toilet seat from toilet.
※ Check for any water leaks.
3
Connect the water supply hose to the
assembled T-valve.
4
1/2" O.D.Comp. conversion
nut with packing
Turn Off Water.
6
Installation
171102_BB-1700,2000 USER's MANUAL.indd 18 2017-11-03 오전 11:28:12