Manual

C1000 Touch
TM
Thermal Cycler Manual
8
Setting Up Email Notification
A run complete confirmation and run report can be emailed directly to any computer with
Internet access. To configure the outgoing email from the C1000 Touch thermal cycler, use the
following instructions:
1. Touch the Log In button on the home screen to log in to the thermal cycler as the
Administrator.
NOTE: The logged in user name appears to the left of the log out button when you
return to the home screen.
2. Touch the Tool s button on the home screen to launch the tools menu.
3. Touch Email Settings in the admin menu.
Setting Up the Gmail server
NOTE: A Gmail account must be set up with user name and password prior to
setting up the instrument Gmail server.
1. Select the Gmail server from the Mail Server dropdown list.
2. Enter the Gmail account user name and password.
3. Touch the Set as Default checkbox (Figure 10).
Figure 10. Gmail server is selected, user name and password have been entered, and
server has been selected as the default server.
4. Touch the Save button to save the current server settings.
5. Touch the Test Email button.
6. Touch the Test Email Address button and enter an email address using the pop-up
alphanumeric keypad.
7. Touch the Attachment Size in MB button and enter a test attachment size.
NOTE: The allowable limit on attachment size is dictated by your institute’s server.
We recommend testing an attachment size between 0.5 and 5 MB. Entering 0 will
send a test email with no attachment.