Manual

C1000 Touch
TM
Thermal Cycler Manual
24
Touch View Status to return to the status screen.
Figure 21. The status screen.
Figure 22. Screen shows status by time remaining.
Pausing and Resuming a Run
A running protocol may be temporarily paused from the protocol status screen. During a
pause, the thermal cycler continues heating or cooling to the target temperature, while the lid
temperature is maintained.
TIP: After a power failure, the C1000 Touch thermal cycler automatically resumes
running a protocol but also displays a warning message.
To pause and then resume a running protocol:
1. Touch the Pause button on the status screen.
WARNING! Pausing a step can adversely change the outcome of the PCR
reaction. If the protocol is paused during a temperature step, the PCR reaction
stays at the target temperature for a longer hold time than the protocol step
requires.