Manual

C1000 Touch

Thermal Cycler Manual

The Incubate screen opens (Figure 23).

Figure 23. The Incubate screen.

NOTE: The default block temperature, hold time, and lid temperature will be the

same as the most recently run incubation.

NOTE: When incubation is occurring at temperatures below 30

C, the lid will

maintain a temperature of 31°C to prevent excessive condensation.

2. Enter the Block temperature, Hold time, and Lid temperature by touching the

corresponding buttons and entering values using the pop-up numeric keypad.

3. Touch the Run button to start the incubation.

NOTE: If multiple blocks are connected, the user can select the appropriate blocks

to run the incubation.

4. To end the incubation and view the final status screen, touch the Cancel button.