Manual

ManualsBrandsBio-Rad ManualsReceivers and AmplifiersC1000 Touch™ Thermal Cycler

C1000 Touch

Thermal Cycler Manual

• IEC 61010-1:2001 Safety Requirements for Electrical Equipment for

Measurement, Control, and Laboratory Use, Part 1: General Requirements

• IEC 61010-2-010:2003 Safety Requirements for Electrical Equipment for

Measurement, Control, and Laboratory use, Part 2-010: Particular Requirements

for Laboratory Equipment for the Heating of Materials

• IEC 61010-2-081:2001+A1:2003 Safety Requirements for Electrical Equipment for

Measurement, Control, and Laboratory use, Part 2-081: Particular Requirements

for automatic and semi-automatic laboratory equipment for analysis and other

purposes

• CAN/CSA-C22.2 NO. 61010-1-04 Safety Requirements for Electrical Equipment

for Measurement, Control, and Laboratory Use, Part 1: General Requirements

• CAN/CSA-C22.2 NO. 61010-2-010-04 Safety Requirements for Electrical

Equipment for Measurement, Control, and Laboratory use, Part 2-010: Particular

Requirements for Laboratory Equipment for the Heating of Materials

• CAN/CSA-C22.2 NO. 61010-2-081-04 Safety Requirements for Electrical

Equipment for Measurement, Control, and Laboratory use, Part 2-081: Particular

Requirements for automatic and semi-automatic laboratory equipment for

analysis and other purposes

• EN 61010-1:2001 Safety Requirements for Electrical Equipment for Measurement,

Control, and Laboratory Use, Part 1: General Requirements

• EN 61010-2-010:2003 Safety Requirements for Electrical Equipment for

Measurement, Control, and Laboratory use, Part 2-010: Particular Requirements

for Laboratory Equipment for the Heating of Materials

• EN 61010-2-081:2002+A1:2003 Safety Requirements for Electrical Equipment for

Measurement, Control, and Laboratory use, Part 2-081: Particular Requirements

for automatic and semi-automatic laboratory equipment for analysis and other

purposes

• UL 61010-1:2004(R2008) Safety Requirements for Electrical Equipment for

Measurement, Control, and Laboratory Use, Part 1: General Requirements

ELECTROMAGNETIC COMPATIBILITY (EMC)

• IEC61326-1:2005 Electrical Equipment for measurement, control, and laboratory use

- EMC Requirements, Class A

• EN61326-1:2006 Electrical Equipment for measurement, control, and laboratory use

- EMC Requirements, Class A

• FCC Part 15, Subpart B, Sections 15.107 and 15.109 as a Class A digital device

FCC WARNINGS AND NOTES

• Warning. Changes or modifications to this unit, not expressly approved by Bio-Rad

Laboratories, could void the user’s authority to operate the equipment

•Note. This equipment has been tested and found to comply with the limits for a Class A

digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference when the equipment is operated in a

commercial environment. This equipment generates, uses, and can radiate radio

frequency energy and, if not installed and used in accordance with the instruction

manual, may cause harmful interference to radio communications. Operation of this

equipment in a residential area is likely to cause harmful interference in which case the

user will be required to correct the interference, at his own expense

• Note regarding FCC compliance. Although this instrument has been tested and found

to comply with Part 15, Subpart B of the FCC Rules for a Class A digital device, please

note that this compliance is voluntary, for the instrument qualifies as an “exempted