Instruction manual

Chapter 3 Using QuantaSoft Software

QX200 Droplet Reader and QuantaSoft Software Instruction Manual

3.2 Run

1. Click Run in the left navigation bar to start the run.

2. In the Run Options window, select the detection chemistry:



If a probe supermix is selected in the well editor, the probe dye sets appear. Select FAM/HEX or FAM/VIC



If an EvaGreen supermix is selected, the EvaGreen dye set appears; the screen conﬁrms the number of

EvaGreen wells conﬁgured on the plate

3.1.3 Using the Advanced Options

Click Options in the Setup window to see all advanced options for data collection and analysis.

Reprocess data with a newer version of the software

Export amplitude data for selected wells to a .csv ﬁle (one ﬁle for each well)

Advanced options.

Select wells by row (checked) or by column (unchecked)

Set threshold display (color)

Run options.

3. Up to 1 minute later, a green circle appears next to the abort button and ﬂashes periodically to indicate the

run is in progress. Active and analyzed wells are also highlighted in green in the plate map.

4. As each well is analyzed, the data appear across the top navigation area. Once the run is complete, all

data are reanalyzed for the ﬁnal data ﬁle.

| 13

QX200 Droplet Reader and QuantaSoft Software Instruction Manual