Assembly Instruction

Please retain this

This assembly requires

assembly instruction for

two people

future use

BEFORE YOU START…

- Installs the two center rails to the left and right ends.

QUANTITY

BOLT

0.31" x 2.76"

Ø 8mm x 70mm

WASHER

0.31" x 0.91" x 0.08"

Ø 8mm x 19mm x 2mm

OPEN WRENCH

K13

BOLT

0.31" x 3.94"

Ø 8mm x 100mm

- If the table doesn't sit level, please adjust the adjustable bolt under

the legs.

HARDWARE

1. Choose a clean, level, spacious assembly area. Avoid hard surfaces that may damage the product.

2. Check and ensure that you have all required contents for complete assembly.

3. Always read the assembly instructions carefully before beginning assembly.

4. The packaging and contents can be a choking hazard, therefore keep out of reach of small children at

5. Do not over tighten the bolts as this may damage the thread.

- Install the leg ends into table top by using bolt (A) , (D), washer (B) and

open wrench (C).

A B

Page 1 of 1

ASSEMBLY INSTRUCTION

PAGE 1
ASSEMBLY INSTRUCTION This assembly requires two people Please retain this assembly instruction for future use A B BEFORE YOU START… 1. Choose a clean, level, spacious assembly area. Avoid hard surfaces that may damage the product. 2. Check and ensure that you have all required contents for complete assembly. 3. Always read the assembly instructions carefully before beginning assembly. 4. The packaging and contents can be a choking hazard, therefore keep out of reach of small children at 5.