Technical Specifications

ManualsBrandsBird-B-Gone ManualsAnimal Traps & Repellents5" Wide x 50' Long Stainless Steel Bird Spikes

SPECIFICATIONS – BIRD-B-GONE STAINLESS STEEL BIRD SPIKES™

PART 1 – GENERAL

1.1 SUMMARY

A. Design Requirements: Select appropriate size as determined by site conditions

to prevent birds from landing and roosting on specified surfaces.

1.2 QUALITY ASSURANCE

A. Single Source Responsibility: Furnish products from one manufacturer for entire

project.

B. Obtain all technical information from the manufacturer.

C. Utilize Bird-B-Gone Authorized Installers who are certified in Bird-B-Gone, Inc.

product installations. Proof of Certification required.

D. Installer shall visit the site to gather all information on existing site conditions.

1.3 SUBMITTALS

A. Product Data: Submit manufacturer’s descriptive literature and product

specifications for each product including catalogs, installation instructions and

other descriptive material.

B. Provide Warranty on material and installation.

C. Provide samples of each type of spike excluding proposed fastening methods.

D. Provide statement by official indicating that they are a certified installation

company.

1.4 PRODUCT HANDLING

A. Protect Bird-B-Gone, Inc. products from damage before, during and after the

installation.

1.5 PROJECT CONDITIONS

A. Coordination: Furnish samples of system(s) so installation can be coordinated

with existing conditions and within on-site conditions.

B. Visit site and field-measure prior to fabrication and delivery of materials.

1.6 WARRANTY

A. Product shall carry a minimum 10 year guarantee against U.V. breakdown and

stainless steel degradation.

B. Installation shall be guaranteed for 2 years.

Summary of content (3 pages)

PAGE 1
SPECIFICATIONS – BIRD-B-GONE STAINLESS STEEL BIRD SPIKES™ PART 1 – GENERAL 1.1 SUMMARY A. Design Requirements: Select appropriate size as determined by site conditions to prevent birds from landing and roosting on specified surfaces. 1.2 QUALITY ASSURANCE A. Single Source Responsibility: Furnish products from one manufacturer for entire project. B. Obtain all technical information from the manufacturer. C. Utilize Bird-B-Gone Authorized Installers who are certified in Bird-B-Gone, Inc.
PAGE 2
PART 2 – PRODUCTS 2.1 ACCEPTABLE MANUFACTURER Manufacturer: Bird-B-Gone, Inc. Bird Spike 2001 Stainless Steel 23918 Skyline Mission Viejo, CA 92692 Tel: 800-392-6915 or 949-472-3122 Fax: 949-472-3116 P.O.C.: Bruce Donoho 2.2 PRODUCT DESCRIPTION A. Model Designation: 1. Bird-B-Gone Stainless Steel Bird Spikes™ - 1”, 3”, 5” or 8” a. Width of Coverage: i. BBG2001/1: 1” - 2” widths ii. BBG2001/3: 2” - 4” widths iii. BBG2001/5: 5” - 7” widths iv. BBG2001/8: 8” - 10” widths b.
PAGE 3
Ty-Wraps, purchase directly from the manufacturer or call for recommended products. PART 3 – EXECUTION 3.1 EXAMINATION A. Examine the installation area and note any detrimental or hazardous work conditions. Notify contracting officer or inspector of the detrimental work conditions. B. Do not proceed with installation until conditions are corrected. 3.2 SURFACE PREPARATION A. Surface should be thoroughly cleaned and free of bird droppings, nesting materials, rust, peeling paint or other debris. B.