User Guide

www.BISSELL.com
5
www.BISSELL.com
4
Product View
WARNING
Do not plug in your vacuum until you are familiar with all instructions and operating procedures.
1
Place the upper handle onto
the base and push it down.
Then attach the handle with
the 2 screws taped to the
handle in a plastic bag.
NOTE: The Crevice Tool is stored inside the Extension Wand.
Assembly
Handle
Height
Adjustment
Carry Handle
Lifetime
Post-Motor
Filter
Pre-Motor
Filter
(not shown)
Dirt Tank
Extension
Wand
Tank Release
Button
Stretch
Hose
Power Pedal
Pet Hair
Corner
Tool
Suction
Indicator
Swivel
Steering
Edge
Bristles
Recline
Pedal
Cord
Rewind
Dusting Brush
Tool
Pet TurboEraser®
Tool
The only tool you will need to assemble your vacuum is a
Phillips screwdriver.
Insert the extension wand base and
turn it to the right to lock in place.
2
3
4
5
Insert the hose end into the back of the
vacuum and twist right to lock in place.
NOTE: The Powerfoot will not suction properly unless the hose is firmly attached.
Wrap hose up and
around the hose
wrap on the handle.
Slide end of hose
into vacuum base.
TurboEraser® ToolDusting Brush
Extension Wand
(Crevice Tool stores inside)
Now, put your accessory tools on the vacuum and you’re ready to go!
Pet Hair Corner Tool