User`s guide

www.bissell.com
13
Maintenance and Care
3.
Maintaining the Pet TurboEraser™
Tool and TurboBrush® Tool
(select models only)
Select models come with either the Pet
TurboEraser™ Tool or TurboBrush
®
Tool.
Both tools should be checked regularly for
clogs and debris wrapping around either
the paddles or bristles.
1. Unplug unit from outlet.
2. Remove tool from hose or vacuum.
3. If clog is present or debris is visible,
unscrew the two screws on the back
of the Pet TurboEraser™ Tool or
TurboEraser
®
Tool to remove the
faceplate and clear any obstructions.
4. To clean debris remove the paddles from
the drive belt and clean debris.
5. Reposition the drive belt on the paddle
roll. Place ends of roll in the slots on sides
as shown. Reposition faceplate and secure
with two screws.
NOTE: The Pet TurboEraser™ Tool is
designed to remove pet hair from
upholstered or carpeted surfaces.
It should not be used on pets.