Owner's Manual

www.bissell.com 800.237.7691
9
Maintenance and care
CAUTION:
Upright storage of the Lift-Off
Steam Mop with a wet mop
pad may result in the formation
of white marks on your floor. To
remove the white marks, clean
area with vinegar.
Tip:
Using distilled or
demineralized water
will maximize the
performance of
your filter.
Tip:
Be sure to use
only a BISSELL
water filter in your
Lift-Off Steam Mop.
When you're done
1. Unplug power cord from outlet.
2. Carefully remove mop pad from swivel
head, as mop pad and lower assembly
will be hot.
3. Any water remaining in the water tank
should be emptied prior to machine
storage.
4. Mop pad can be machine washed in
warm water. Use only liquid detergents.
Do not use bleach or fabric softeners; for
best results, air dry.
5. Wrap power cord around quick release
cord wrap on side of Detachable Steam
Pod.
If you fill your Lift-Off Steam Mop
cleaner with normal tap water, it is
essential to check the water purifica-
tion system and replace it when it is no
longer effective. Change the filter when
the bright green grains turn blue. If the
filter is not changed at the appropriate
time, calcium deposits will accumulate
on the heating element, causing
damage or reduced performance.
Using distilled or demineralized water
will maximize the performance of your
filter.
To order a replacement water purification
system, refer to the replacement parts
section on page 10.
Replacing the water purification system