User's Manual

General Operations

To use the hearing assistive device with your mobile phone for the first time, you must first

connect them wirelessly by pairing.

Pairing

• To connect the control unit to a mobile phone, hold the ‘Up’ and ‘Down’ buttons for 2

seconds. This puts the control unit into paring mode. The status indicator would blink

blue and red alternately.

• Turn on the mobile phone Bluetooth functions and search for Bluetooth devices.

• Select ‘IClear HAD1000’ to pair with the desired device.

• If prompted to enter a passcode, enter ‘0000’.

NOTE: Most mobile phones when paired would be automatically connected with both phone

and music Bluetooth capabilities.

After pairing the control unit to your mobile phone, you may now use the hearing assistive

device to answer and make calls or listen to music.

Pick Up Calls

When a call comes to the mobile phone, press the ‘Power’ button once.

Reject Calls

To reject an incoming call or an incorrectly placed outgoing call, hold the ‘Power’ button

for 2 seconds.

Voice Call

To activate voice call, hold the ‘Down’ and ‘Power’ buttons for 2 seconds. The accuracy of

this function is dependent on the mobile phone.

PAGE 14