User guide

8818 User Guide

(BB1505-F) Cleaning and Disinfection

Service and Repair

Caring for the Transducer

The transducer may be damaged during use or processing, so it must be checked

before use for cracks or irregularities in the surface. It should also be checked

thoroughly once a month following the procedure in

Care, Cleaning & Safety

Cleaning and Disinfection

To ensure the best results when using BK Medical equipment, it is important to

maintain a strict cleaning routine.

Full details of cleaning and disinfection procedures can be found in

Care, Cleaning

& Safety

that accompanies this user guide. A list of disinfectants and disinfection

methods that the transducer can withstand are listed in the Product Data sheet.

Sterile covers are available. See the Product Data sheet for more information.

Starting Imaging

All equipment must be cleaned and disinfected before use.

Connecting the Transducer

The transducer is connected to the system using the array Transducer Socket on the

system. To connect, the transducer plug’s locking lever should first be in a horizontal

position. Align the plug to the system socket and insert securely. Turn the locking

lever clockwise to lock in place.

When connected, the transducer complies with Type BF requirements of EN60601-1

(IEC 60601-1).

WARNING

Service and repair of BK Medical electromedical equipment must be carried out only by the

manufacturer or its authorized representatives. BK Medical reserves the right to disclaim all

responsibility, including but not limited to responsibility for the operating safety, reliability

and performance of equipment serviced or repaired by other parties. After service or repairs

have been carried out, a qualified electrical engineer or hospital technician should verify the

safety of all equipment.

WARNING

Users of this equipment have an obligation and responsibility to provide the highest possible

degree of infection control to patients, co-workers and themselves. To avoid cross

contamination, follow all infection control policies for personnel and equipment that have

been established for your office, department, or hospital.

WARNING

Keep all plugs and sockets absolutely dry at all times.