User manual

Telnet Connection

The power supply can be connected via Ethernet (LAN) interface

using Telnet client with the following port:

Telnet Port: 5024

Windows XP Users

1. Open a command prompt window, which can be found by

going to Start > All Programs > Accessories > Command

Prompt. Alternatively, you can click on Start, select Run…,

and type in cmd in the Open: input box. Click OK to open

Command Prompt.

2. At the prompt, type in Telnet<sp><device IP><sp>5024

where:

<sp>is a space.

<device IP>is the IP address you have configured for the

power supply.(see “Ethernet (LAN) Interface” for details)

Example: Telnet 192.168.1.150 5024

3. The following screen will be displayed, and users can enter

remote commands at the prompt, such as *IDN?.