User manual

93
*SAV
Description:
Saves power supply settings into a memory location
Syntax:
*SAV<SP><location>
<location> - Memory location number to save settings
into. 0 – 9 are valid numbers.
Example:
*SAV 2
Saves instrument settings into memory location 2.
*RCL
Description:
Recalls power supply settings
Syntax:
*RCL<SP><location>
<location> - Memory location number to recall settings
from. 0 – 9 are valid numbers.
Example:
*RCL 3
Recalls instrument settings from memory location 3.
SCPI Command Subsystem
The following list of commands under each subsystem is supported
by the power supply. Some of them cannot be used without optional
interface cards installed, such as the GPIO subsystem. See the
notes under the command (if available) for details.
GPIO Subsystem
GPIO
:DIRection
Measure Subsystem
MEASure
:CURRent?
:CURR2?
:VOLTage?
:VOLT2?
Memory Subsystem
MEMory
:VSET
:VSET2
:ISET