User manual

101
Format:
<NRf>
MEMory:SAV
Description:
Saves the configured voltage and current (using
MEM:VSET and MEM:ISET commands) values into the
selected memory location (using MEM command).
Syntax:
MEMory:SAV
Example:
MEM:SAV
Output Subsystem
OUTput
Description:
Configure/Query the state of the output.
Syntax:
OUTput<SP><Boolean>
OUTput?
Example:
OUT 1
OUT ON
Enables the output. For dual channel models, it
enables output on channel 1.
Query:
OUT?
Return String:
ON
Format:
ON or OFF
OUTput:ALL
Note:
For dual channel models only.
Description:
Enables/Disables all channel output. This will override
the OUTPUT MODE settings in the SYSTEM
SETTINGS menu.
Syntax:
OUTput:ALL<SP><Boolean>
Example:
OUT:ALL 1
Enables both channels’ outputs.
OUTput:LIMit:VOLTage
Description:
Configures/Queries the voltage maximum limit. For
dual channel models, this will configure voltage limit for
channel 1.
Syntax:
OUTput:LIMit:VOLTage<SP><voltage>