User manual

110
PROGram:STEP:CURRent
Description:
Configures/Queries the current setting for the selected
step (use PROGram:STEP command to select step).
For dual channel models, this will be for channel 1.
Syntax:
PROGram:STEP:CURRent<SP><current>
PROGram:STEP:CURRent?
<current> - 0 – max. rated current.
Example:
PROG:STEP:CURR 1.234
Set 1.234 A as current setting for the selected step in
the program sequence.
Query:
PROG:STEP:CURR?
Return String:
1.234
Format:
<NRf>
PROGram:STEP:CURR2
Note:
For dual channel models only.
Description:
Configures/Queries the current setting for the selected
step (use PROGram:STEP command to select step) for
channel 2.
Syntax:
PROGram:STEP:CURR2<SP><current>
PROGram:STEP:CURR2?
<current> - 0 – max. rated current.
Example:
PROG:STEP:CURR2 1.234
Set 1.234 A as current setting for the selected step in
the program sequence for channel 2.
Query:
PROG:STEP:CURR2?
Return String:
1.234
Format:
<NRf>
PROGram:STEP:ONTime
Description:
Configures/Queries the step timing (the length of period
to hold the settings) of the selected sequence. Unit is in
seconds.
Syntax:
PROGram:STEP:ONTime<SP><seconds>
PROGram:STEP:ONTime?
<seconds> - 0.010 – 2000 (max.)
Example:
PROG:STEP:ONT 0.050
Sets the selected step time to 0.050 seconds (50 ms).
Query:
PROG:STEP:ONT?