User manual

117
Return String:
LOW
Format:
<range>
[SOURce]:VOLT2
Note:
For dual channel models only.
Description:
Configures/Queries theVISET voltage setting for
channel 2.
Syntax:
[SOURce]:VOLT2<SP><voltage>
[SOURce]:VOLT2?
<voltage> - 0 – max. rated voltage.
Example:
SOUR:VOLT2 20.000
Set voltage of channel 2 to 20.000 V.
Query:
SOUR:VOLT2?
Return String:
20.000
Format:
<NRf>
[SOURce]:VOLT2:PROTection
Note:
See PROTection:OVP2 command.
[SOURce]:VOLT2:PROTection:LEVel
Note:
See PROTection:OVP2:LEVel command.
System Subsystem
SYStem:AVErage
Description:
Configures/Queries the measurement average setting.
Syntax:
[SYStem]:AVErage<SP><number>
[SYStem]:AVErage?
<number> - 1 – 10 are valid numbers.
Example:
SYS:AVE 2
Set measurement average to 2.
Query:
SYS:AVE?
Return String:
2
Format:
<NR1>