User manual

129
OUT/OUT2
Note:
OUT2 command is for dual channel models only.
Description:
Configures/Queries the output state. For dual channel
models, use OUT2 command to configure/query
channel 2 output state.
Syntax:
OUT<SP><state>
OUT2<SP><state>
OUT?
OUT2?
<state> - ON or 1 to turn ON
- OFF or 0 to turn OFF
Example:
OUT 1
Turns ON (enables) the output
Query:
OUT?
OUT2?
Return String:
ON
Output is enabled.
Format:
<state>
OUTM/OUTM?
Note:
This command is for dual channel models only.
Description:
Configures/Queries the output mode for multi or single
output control for dual channel models.
Syntax:
OUTM<SP><mode>
OUTM?
<mode> - SINGLE or 1 for single channel output
control
- MULTI or 0 for dual channel output control
(control both channels’ output state
simultaneously)
Example:
OUTM 1
Sets the output mode to SINGLE
Query:
OUTM?
Return String:
SINGLE
Format:
<mode>