User manual

158

7 Calibration

Access Calibration Menu

Follow the steps below to access the calibration menu.

1. Press , then to enter CALIBRATION. The

following screen will be displayed:

2. Enter the password: 13579 with the numeric keypad.

3. There will be two options. 1. CURRENT CALIBRATION,

and 2. VOLTAGE CALIBRATION, as shown in the screen

below. A third option 3. EXT. INPUT CALIB is available if

the supply has an optional DIO/Analog Interface Card

installed.

PLEASE KEYIN PASSWORD : _

1. CURRENT CALIBRATION

2. VOLTAGE CALIBRATION