User manual

165

External Analog Input Calibration

This calibration option is only available if the optional DIO/Analog

Interface Card is installed in the power supply.

Follow the steps below to proceed with external analog input

calibration.

1. From the calibration menu, press to enter EXT. INPUT

CALIB. If the single channel DIO/Analog Interface Card is

installed, then Figure 35 will be shown. If the dual channel

version is installed, Figure 36 will be displayed.

Figure 34- Single Channel External Analog Input Calibration

Calib EXT . Lo Volt = 1 . 000 V

Calib EXT . Lo Volt = 9 . 000 V

CH 1 EXT . VOLT Res = Start

CH 1 EXT . CURR Res = Start