User manual

13
use the screwdriver to pry the top part of the card until the
card has slid out with enough room to pull out the card by
hand.
3. Be sure to ground yourself before pulling out or touching any
parts of the printed board on the interface card.
1.8 Rackmount Installation
There are four rackmount kit options available for this series of
power supplies: 2U size for single power supply, 2U size for two
power supplies mounted side by side, 3U size for single power
supply, 3U size for two power supplies mounted side by side. The
following step by step instructions will guide you in installing these
optional rackmount kits onto the power supply for a standard 19-inch
rack fitting.
Models 9171, 9172, 9181: Follow instructions for 2U rackmount
installation.
Models 9173, 9174, 9182, 9183, 9184, 9185: Follow instructions for
3U rackmount installation.