User manual

Output Check

Voltage Check

Follow the steps below to check basic voltage output with no load

connected.

1. Turn on the power supply. The display will show the OFF

annunciator next to the setting voltage on the left side of the

display.

2. Enable the output by pressing (or and for

dual channel models). The output indicator light will be lit

and display will show the measured output voltage. The

OFF annunciator will change to CV.

3. Using the numeric keypad, press and enter a voltage

value. Then press the key. For dual channel models,

select the channel first before setting the voltage. The

selected channel is indicated by a flashing CH1 or CH2

annunciator on the display. Press or to select

the channel.

4. The measured output voltage should change to a value close

to or exactly what you entered (For example, if voltage value

is 30.000 V, it may show 29.998 V).

5. (Optional) You may also verify the output voltage by

connecting either the (+) and (-) terminals on the front panel

or the rear panel to an external voltmeter. The measured

value should match or be close to the entered voltage value.

Vset

Enter

OUTPUT

CH1

CH2