User manual

7. Press to turn off the power supply and remove the

short on the output terminals.

Check Model and Firmware Version

The model and firmware version can be verified from one of the boot

up screens, or from using the *IDN? query remote command,

described in “4.2 Remote Commands”. Additionally, other system

version and information can be found by following the steps below:

1. Press , then to enter INFORMATION. The

following screen will be displayed.

2. There are multiple version numbers shown. However, the

firmware version is displayed under MODULE VER. In the

example screen above, firmware version is shown as 1.10.

3. Press twice to exit the menu.

LCD VER = 2.00 / WEB VER = 1.04

MODULE VER = 1.10 / 1.10

POWER

Esc