User manual

36
BAUDRATE: 57600
PARITY: NONE
DATA BITS: 8
STOP BIT: 1
FLOW CONTROL: NONE
RS-485 Interface
Multiple power supplies (up to 31) can be connected together in
series and be controlled via USB (virtual COM) interface. Here is an
illustration of how the setup will look like:
Figure 15- RS-485 Setup to Control Multiple Supplies (USB)
To setup and configure the power supplies, follow these steps:
Requirements:
- Optional RS485 cards must be installed on each power supply
- For N number of power supplies, you will need N-1 number of
Ethernet CAT5 straight (pin-to-pin) cables. (Example: To connect
5 power supplies, 4 cables are required)