User manual

42
3. To cancel this action, press with NO marked by the
cursor. To confirm resetting the instrument to factory default,
press to select YES and press .
4. After approximately 5 seconds, the instrument will
automatically jump back to the normal display. All settings
are now set back to their factory default values.
Table 3 Factory Default Settings
REMOTE
USB
GPIB ADDR
1
KEY LOCK
OFF
IP CONFIG
STATIC
IP ADDRESS
255.255.255.255
BEEP
ON
LCD BACKLIT
ALWAYS ON
VOLT LIMIT MAX
Max. rated voltage of model
VOLT LIMIT MIN
0.000V
CURR LIMIT MAX
Max. rated current of model
CURR LIMIT MIN
0.0005A
V SLEWRATE
7.000 V/ms
I SLEWRATE
0.6000 A/ms
MEASURE AVERAGE TIME
2
LED MODE
OFF
OVP SETTING
OFF, SET = Max. rated voltage
of model
OCP SETTING
OFF, SET = Max. rated current
of model
TIMER FUNCTION
OFF
Enter
Enter