User manual

Note:The voltage setting range is dependent on the unit’s

maximum voltage output specification as well as the

voltage limits set from the system menu. Verify VOLT

LIMIT MAX and VOLT LIMIT MIN settings if you are

unable to set a voltage within the specifications of the

power supply.

Setting Current

Follow the steps below to set the output current:

1. For single channel models, skip to step 2 below. For dual

channel models, from the main display press or

to select the channel for setting current. The channel

indicators CH1 or CH2 will flash to indicate the selected

channel.

2. With the main display shown, press and use the

numeric keypad to enter your set current. Then press .

Below is an example screen for setting 2 A.

OFF100 . 00 V 2 . 000 A

VOLT RANGE = LOW ( : H / : L )

SET = 2.000 A

OFF 5 . 000 V 2 . 000 A

Iset

Enter