User manual

LIMIT MAX and VOLT LIMIT MIN settings if you are

unable to set a voltage within the specifications of the

power supply.

Slew Rate Configuration

Voltage and current slew rate of the output can be configured by

doing the following:

1. Press , then to enter OUTPUT SETTING. Press

to select VOLT SLEWRATE SETTING. The following will be

displayed:

For Dual Channel models:

2. Use the keypad to enter the voltage slew rate. (Refer to

Table 4) Then press the save the changes.

3. Press once to return to the previous menu items, and

press to select CURR SLEWRATE SETTING. The

following will be displayed:

V SLEWRATE = _ 7.000 V / ms

CH1 V SLEWRATE = _ 7.000 V / ms

CH2 V SLEWRATE = _ 7.000 V / ms

Enter

Esc