User manual

55
Measurement Average Setting
The averaging measurements used to display a reading can be
adjusted by following the stepsbelow:
1. Press , then to enter OUTPUT SETTING. Press
to select MEASURE AVERAGE. The following will display:
2. Use the numeric keypad to enter the number of
measurements the instrument will average out prior to
displaying the value. Valid numbers are from 1 to 10.
3. Press to save changes, then press three times
to exit the menu.
3.6 Dual Channel Configurations
Features described in this section pertain to dual channel models
9173 and 9174 only. They are not available for all other models.
Multi/Single Output Control
Dual channel outputs can be configured so that pressing the output
buttons can turn ON (enable) or OFF (disable) both channels’
outputs simultaneously.
AVERAGE TIME = _ 2
Menu
2
5
Enter
Esc