User manual

3.8 LED and Low Current Test Modes

LED Mode

All of these power supplies have LED mode, which enables them to

function specifically for LED test applications. When this mode is

ON (enabled), the power supply can operate in such a way as to

minimize or almost eliminate the inrush current drawn by the LED

load, which normally exists when the output switches from an OFF

state to an ON state.

To enable LED mode, follow these steps:

1. Press , then to enter OUTPUT SETTING. Press

to select LED MODE SETTING.

2. Press to select ON, then press to confirm the

changes. Press twice to exit the menu. For dual

channel models, both channels will have LED mode enabled.

Consider the following example for 9184 with setup in Figure 22:

LED MODE = ON

Enter

Esc