User manual

3.9 Output Protection

Configure OVP

Overvoltage protection (OVP) is available to limit the voltage output

and to protect a connected DUT from an overvoltage condition.

When the power supply trips the OVP, a short beep will sound and

the OVP (OVP1/OVP2 for dual channel models) LED indicator on

the front panel will be lit. The green output light will also disappear

and output will turn OFF (disable) immediately. To clear the OVP

trip, press any key and the OVP (OVP1/OVP2 for dual channel

models) LED indicator will turn OFF. To activate OVP, follow the

steps below:

1. Press , then to enter PROTECTION, and press

to select OVP SETTING.

For Dual Channel models:

OVP = ON SET = 70.000 V

CH1 OVP = ON SET = 70.000 V

CH2 OVP = OFF SET = 70.000 V