User manual

2. Press to select ON. Press to confirm the changes,

and use the numeric keypad to set the voltage limit for the

protection to trip. Press again to save changes. When

the power supply voltage output reaches this limit, the OVP

will trip.

3. Press twice to exit the menu. To disable it, select

OFF.

Configure OCP

Overcurrent protection (OCP) is available to limit the current output

and to protect a connected DUT from an overcurrent condition.

When the power supply trips the OCP, a short beep will sound and

the OCP (OCP1/OCP2 for dual channel models) LED indicator on

the front panel will be lit. The green output light will also disappear

and output will turn OFF (disable) immediately. To clear the OCP

trip, press any key and the OCP (OCP1/OCP2 for dual channel

models) LED indicator will turn OFF. To activate OCP, follow the

steps below:

1. Press , then to enter PROTECTION, and press

to select OCP SETTING.

OCP = ON SET = 10.000 A

Enter

Esc

Enter