Ethernet Adapter Manual AV200

Adapter Configuration

Corinex AV200 CableLAN Adapter

3.4 Change Configuration Page

3.4.1 Overview

The configuration pages allow you to change the settings on the CableLAN adapter.

Any parameters changed here will be stored in the CableLAN adapter‘s permanent

memory, and at the next startup, will be activated automatically. Any changes will take

effect immediately after startup, with the exception of the Network Configuration

settings (these require a restart of the CableLAN adapter).

The configuration is divided into two sections: “Basic settings” and “Advanced

settings.”

Notes :

• A different IP must be set for each adapter on the network. The adapter’s

IP does not need to be in the same range as the PC, except when trying to

change the adapter’s settings on the configuration page (10.10.X.X and netmask

255.255.0.0 for an adapter with the default factory settings).

• The adapter’s netmask can also be changed, for example to a type C

(255.255.255.0) if necessary. This is a more advanced option, which you may

ignore if you’re not familiar with it.