User's Manual

Getting Started
Modem 3600 3-3
Answering a Call
There are three ways to answer a call:
Autoanswering
Normally the modem is configured to autoanswer on the first ring. If a
telephone is plugged into the TELSET/LEASED LINE jack, it will also
ring.
Answering Manually
When detecting a ring, the modem LCD displays ringing status.
Press TALK/DATA to answer the call and place the modem in the data
mode.
Answering from Terminal with AT Command Set
The modem displays the ring response.
To answer a call, type ATA. The modem sends an answer-back tone and
attempts to connect to the remote modem.
Ending a Call
There are two ways to complete a call:
Ending a Call Using the Front Panel
1) Press the TALK/DATA pushbutton. DO YOU WANT TO
DISCONNECT will be displayed.
2) Answer YES.
Ending a Call from a Terminal with the AT Command
Set
1) Enter +++ and the modem will enter command mode.
2) Enter ATH and the modem will terminate the call.