User's Manual

102
Modem 34336
Table 5-1 (continued). Hayes Compatible Commands.
COMMAND FUNCTION/EXPLANATION
&Z Store Telephone Number
Parameters are 0-9 (available memory locations).
B Buffer Mode/Speed Conversion *
1
\B0 Disables speed conversion.
\B1 Enables speed conversion. <$!B10>
\C MNP Class (Limit) *
1
\C1 Limits operation to MNP class 1.
\C2 Limits operation to MNP classes 1 and 2
\C3 Limits operation to MNP classes 1 through 3.
\C4 Limits operation to MNP classes 1 through 4.
\C5 Limits operation to MNP classes 1 through 5.
\D Dialing Message
\D0 Disables DIALING message.
\D1 Enables DIALING message.
\F MNP Flyback Buffer *
1
\F0 Enables flyback buffer.
\F1 Disables flyback buffer.
\K V.42 Break Handling *
1
\K0 Selects normal break handling.
\K1 Selects destructive/expedited break handling.
\K2 Selects non-destructive/expedited break handling.
\K3 Selects non-destructive/ non-expedited break handling.
M V.42 bis Operation *
1
\M0 Enables V.42 bis operation (error correction with data
compression).
\M1 Disables V.42 bis operation.
1
Option can be changed only when Modem is off-line.
Default settings (where applicable) are in bold face.
* If user profile 1 is active, options are controlled (for Hayes mode operation) by given
commands or Summary Setup. Do not change via front panel (except via
Summary Setup).