User's Manual

2.0 Quick Start

2.2 Front-Panel LCD and Controls

To select a Quick Setup configuration, you will need to use the pushbuttons

and liquid-crystal display (LCD) on the modem’s front panel. These features

are shown in Figure 2-2. For a detailed explanation of the front panel

controls, see Chapter 3.

2.2.1 P

OWER

-O

CREEN

When the Modem is powered on, the LCD momentarily displays the power-on

screen. The top line identifies the modem type. The lower line indicates the

software revision level.

NOTE

The software revision level of your modem may be different from the

number shown above.

The Modem spends about two seconds checking the ROM checksum and

doing self-tests, and then displays the EIA status screen.

Figure 2-2. Front-Panel LCD and Controls.

LIQUID CRYSTAL DISPLAY (LCD)

PUSHBUTTONS

FRONT PANEL

2 3 ENT

123

V.34/33.6

Version 3.01