User's Manual

2.0 Quick Start

2.3 Quick Setup

To set up the Modem for immediate use (or to quickly change the modem’s

configuration for an alternate mode of operation), select one of the factory-

preset Quick Setup configurations (see Table 2-1). Your Modem will be ready

for operation. You will not need to make further adjustments.

When you select a Quick Setup, the Modem uses internal memory to

automatically set all of its options to the chosen configuration. All

previously-stored option settings are overwritten. The Quick Setup

does not affect telephone numbers stored in the modem’s memory.

You can customize a Quick Setup configuration by changing specific

option settings (see 3.0 Modem Setup Options).

ELECT

A Q

UICK

ETUP

To activate a Quick Setup configuration, follow the steps below. As you do,

you may find it helpful to refer to the LCD flow chart at the back of this

manual.

1. Press the ENT (enter) pushbutton on the modem’s front panel.

Screen 1 of the MAIN MENU is displayed:

2. Press pushbutton 2. Screen 1 of the QUICK SETUP menu appears:

3. Use the front-panel arrow pushbuttons to move through the QUICK

SETUP menu. There are 12 QUICK SETUP configurations. Each

configuration is discussed in Table 2-1.

4. When the LCD shows the Quick Setup configuration you want, press

pushbutton 2. The bottom line of the display will flash.

5. Press ENT. You will see SETUP screen 1. Press ENT a second time.

The modem resets and the selected Quick Setup takes effect.

MAIN MENU <1>

TALK QUICK DIAL

QUICK SETUP <01>

2-W DIAL (Hayes)