User's Manual

141
Appendix C: Summary Setup
MISCELLANEOUS OPTIONS:
NOTE
“misc1” and “misc2” are displayed to help indicate the relative positions
of individual options across the LCD. The dashes (-) are shown in this
example to help indicate the relative positions of these three particular
options across the LCD.
misc1 misc2
1230000 0100 –– –
Multimode handshake: 0=T1 timer, 1=V.32 bis Annex A
Answer tone detection: 0=disable, 1=enable
ALB make busy: 0=disable, 1=enable
V.13 operation: 0=off, 1=TX only, 2=RX only,
3=TX and RX
DTE=DCE speed: 0=disable, 1=enable
V.25 bis DTR dialing: 0=disable, 1=enable
Operating mode fallback: 0=Bell 212A and
Bell 103,1=V.22/V.21/V.23
Remote test: 0=disable, 1=enable
DSR during ALB: 0=disable, 1=enable
FP: 0=disable, 1=enable
LCD intensity: 0,1 . . . 7 (7=greatest intensity)
Speaker volume: 0 =low, 1=medium, 2=high
Speaker control: 0=off, 1=on till CD, 2=on,
3=off during dialing