User's Manual

2.0 Quick Start

Table 2-1 (continued). Available Quick Setup Configurations.

QUICK SETUP <07> 2-WIRE LEASED-LINE ANSWER MODE—

2-W LEASED (ANS) Same as Quick Setup 6 except for modem answer/ originate

status. Use Quick Setup 7 if the leased line is a 2-wire line

and you want to configure the Modem as the answer modem.

QUICK SETUP <08> 4-WIRE LEASED LINE ORIGINATE MODE—

4-W LEASED (ORG) Same as Quick Setup 6 except for line type. Use Quick

Setup 8 if the leased line is a 4-wire line and you want to

configure the Modem as the originate modem.

QUICK SETUP <09> 4-WIRE LEASED LINE ANSWER MODE—

4-W LEASED (ANS) Same as Quick Setup 6 except for line type and modem

answer/originate status. Use Quick Setup 9 if the leased

line is a 4-wire line and you want to configure the Modem

as the answer modem.

QUICK SETUP <10> V.33 LEASED LINE OPERATION—

4-WLL V.33 This Quick Setup configures the Modem for V.33

operation. This provides compatibility with V.33 modems.

QUICK SETUP <11> 2-WIRE DIAL BELL 208 OPERATION—

2-W DIAL (208) This Quick Setup configures the Modem for 2-wire dial

operation compatible with Bell standard 208B.

QUICK SETUP <12> 2-WIRE DIAL V.32/208 AUTO-DETECT MODE—

2-W DIAL V32/208 This Quick Setup configures the Modem to automatically

select V.32 bis (V.13) or Bell 208 operation, depending on

the mode of the originating modem.

QUICK SETUP <13> 4-WIRE LEASED LINE V.29 MODE— This Quick Setup

4-WLL V.29 configures the modem for V.29 operation, for

compatibility with V.29 modems.

QUICK SETUP <14> V.29 FAST MASTER MODE— This Quick Setup con-

V.29 FAST MASTER figures the modem for V.29 fast train master operation, for

use in a multidrop network where multiple remote (slave)

modems share the master Modem as the host modem.

QUICK SETUP <15> V.29 FAST SLAVE MODE — This Quick Setup configures

V.29 FAST SLAVE the modem for V.29 fast train slave operation, for use in a

multidrop network where multiple remote (slave) modems

share the same host (master) modem.