User's Manual

3.0 Modem Setup Options

NOTE

If you have selected a Quick Setup or have changed certain options

settings, pressing the ENT pushbutton to exit the SETUP menu will

cause the modem to reset.

3.2.2 H

ELECT

PTIONS

Options are configured from the SETUP menu.

To access the SETUP menu, press the right-arrow pushbutton at

page 1 of the MAIN MENU. This will take you to page 2 of the MAIN MENU.

Press push button 1 to select SETUP.

The SETUP menu has six screens. Use the arrow pushbuttons until the

option you wish to configure is displayed on the bottom line of the LCD

window. Select the option you wish to configure by pressing the pushbutton

that corresponds to the number on the front panel.

When you select an option, the option flashes on the LCD. The option will

not take effect until you leave the SETUP menu. Simply accessing an option

screen does not change the option, so not hesitate to move through the

various LCD screens in the SETUP menu.

Note the following points:

• Selected options do not become active until you leave the SETUP menu.

• Changing some options causes the modem to automatically reset.

• The options you select are automatically saved by the Modem when

you leave the SETUP menu.

1. DEC/INC (Decrease/Increase) Screens. Several option screens show

the abbreviations DEC and INC on the bottom line of the LCD display. The

abbreviations mean the numerical value shown on the top line (e.g., a stored

phone number) can be changed. Selecting DEC (pushbutton 1) decreases

the value; selecting INC (pushbutton 3) increases it.

Front panel LCD

SETUP <1>

TYPE LINE SPEED