User's Manual

30
Modem 34336
2. Option-Selection Example. The following example illustrates option
selection. As you follow the steps below, refer to the LCD flow chart (SETUP
OPTIONS side) at the back of this manual. When you are finished, you can
easily restore default settings for the type of application you are using by
selecting the appropriate Quick Setup (see Section 2.3, Quick Setup).
The example shows how to change the volume of the modem’s speaker from
LOW or HIGH (the default setting) to MEDIUM. To make this adjustment,
locate the SPEAKER VOLUME screen on the LCD. Access MAIN MENU
screen 2, then SETUP screen 4. Finally, access MODEM SETUPS screen 5.
The steps are explained in detail below.
After powering on the modem, press ENT to get the first screen of the MAIN
MENU. Press the right arrow pushbutton to go to screen 2 of the MAIN
MENU, shown below.
Press pushbutton 1 to access the first
page of the SETUP menu, shown right.
Press the right arrow pushbutton
three times to display SETUP screen 4,
shown left.
Press pushbutton 3 to select MODEM
(for MODEM SETUPS). The first
MODEM SETUPS screen is shown right.
Press the right arrow pushbutton four
times to reach MODEM SETUPS
screen 5, shown left.
MAIN MENU <2>
SETUP TEST RMT
12
3
SETUP <1>
TYPE LINE SPEED
12
3
SETUP <4>
TEST EIA MODEM
12
3
MODEM SETUPS <1>
CDLVL TXLVL
12
3
MODEM SETUPS <5>
FP SPK SPKVOL
12
3