User's Manual

Modem 34336

Table 4-4. Responses To Diagnostic Port Commands.

RESPONSE MEANING

ERROR Command error (incomplete, wrong syntax, etc.). (If

CONNECT or CON is issued without an address or *, the

modems will not connect, and there will be no ERROR

message.)

ADDRESS g,u The Modem has connected with diagnostic port of modem

at address g,u (group and unit). Address may be

preceded by A, S, or both—see below.

A One or more modem alarms has been detected. An alarm

indicates a condition that may require attention (power

loss, loss of carrier, etc.).

S Valid statistics have been collected on a call or attempted

call. Statistics include information such as call duration

call, signal quality level, etc.

RESET Response to RESET command. Prompt ( >) appears when

reset is complete.