User`s guide

Security
8-10 Modem 3600
The Modem 3600 responds by scrolling any illegal attempt information
onto the screen as in the following example:
USER NUMBER: 01, ILLEGAL
ATTEMPTS: 1,
STATUS: NORMAL
USER NUMBER: 14, ILLEGAL
ATTEMPTS: 7,
STATUS: SUSPENDED
OK
Enter the $Mn command (where n equals user number) to reset a
specific user's illegal attempt count.
Enter the $M* command to reset all of the user’s illegal attempt counts.
Factory Reset $F=pw$pw
To reinitialize the security feature enter the $F=pw$pw command
(where pw is the "current" superuser password). This command deletes
all user information and reinstates factory default passwords. User
information cannot be recalled.
Removing a User $Rn
This superuser command removes a user from active status without
deleting all of the user’s information. The user can be restored to active
status by setting the password with the corresponding user number as
previously mentioned. To remove a user, enter
AT$Rn
where n is the user numbers 2-50.
The superuser or user with ID #1 cannot be deleted from the user list.
Security Status $E?
System security status can be verified using the $E? command.
Display User Status $S?
Enter the $S? command to indicate whether or not the current user has
superuser status.
The Modem 3600 responds with one of the following responses:
SUPERUSER STATUS
NORMAL STATUS