User`s guide

Status Registers
10-24 Modem 3600
Bit Mapped S72
Password Timeout S73
S73 sets the length of time the remote user has to enter a password
before the secure Modem 3600 drops the call. The default is 0.
Callback Delay S74
The length of time the secure modem waits to place the callback call
after the remote user correctly enters a password and the call is dropped.
The default is 15 seconds.
Callback Retry S75
The number of times the modem will attempt to place the callback call
to a remote user if the first attempt is unsuccessful. The default is 0.
Bit Value Command Description
0 0
1
\J
\J1
Disable slaved DTE/DCE (constant
speed DTE on)
Disable slaved DTE/DCE (constant speed
DTE on)
2, 1 -- -- Reserved
30
1
&R9
&R2
CTS does not follow DCD
CTS follows DCD
6-4 -- -- Reserved
7 0
1
-- Disable autocallback
Enable autocallback
Bit Value Command Description
7-0 0-255 -- Time in seconds (0 = disable)
Bit Value Command Description
7-0 0-255 -- Time in seconds (0 = disable)
Bit Value Command Description
7-0 0-255 -- Number of attempts to place the call