User`s guide

Hardware Options
Modem 3600 E-11
\Q page 6-
7
S54 Disable DTE flow control
\Q1 S54 Enable DTE XON/XOFF flow
control
\Q2 S54 Enable CTS flow control to the DTE
\Q3 S54 Enables bilateral CTS/RTS flow
control
\Q4 S54 Disable DCE flow control
\Q5 S54 Enable DCE XON/XOFF flow
control
\Q6 S54 Enable CTS flow control to the DTE
\Q7 S54 Enable CTS flow control to the DTE
\R page 5-
21
S60 Ring indicate, blinks for ring and
remains on for duration of call
\R1 S60 Ring indicate, blinks for ring and turns
off when call is answered
\T page 6-
10
S58 Disable inactivity timer
\Tn S58 Set inactivity timer to n (n = 1-255
minutes)
\V page 5-
6
S60 Disable protocol result codes
\V1 S60 Enable protocol result codes
\X page 6-
8
S54 No XON/XOFF characters to remote
DCE
\X1 S54 Pass XON/XOFF characters to remote
DCE
*AS page 5-
27
-- Disable V.34 asymmetric bit rate
*AS1 -- Enable V.34 asymmetric bit rate
*AUn page 5-
16
-- Dial number stored at location n upon
transition of DTR in command mode
(n = 1-9)
*CNx,n page 5-
40
-- Store phone number n in location x
(x = 1-9)
Command Page S-Reg Description
†
cannot be executed from remote configuration mode