User`s guide

Hardware Options
E-28 Modem 3600
Factory Option Sets
Factory Option Set #1
(Asynchronous Dial-up with V.42 bis Protocol)
(AT&F or AT&F1)
MODEM OPTIONS TEST OPTIONS
DCE rate - 33600 Bilateral digital loop disabled
Modulation automode DTE local test disabled
V.34 rate threshold high DTE remote test disabled
V.34 asymmetric rate enabled Remote commanded test enabled
Normal originate Test timeout off
Fast train disabled
Auto retrain enabled DIAL LINE OPTIONS
SQ auto rate disabled Tone dial
Transmit clock internal Auto dial #1
Dial line Wait for dial tone
Jack type RJ11 Wait delay 2 seconds
Line current disconnect long Pause delay 2 seconds
Long space disconnect enabled Call timeout 30 seconds
V.22 guard tone disabled Answer on 1 ring
Autocallback disabled
PROTOCOL OPTIONS DTE OPTIONS
LAPM protocol enabled Async data
MNP protocol enabled DTE rate - 115200
Protocol fallback enabled 8 bit, no parity
Data compression normal Async controlled dialer
Constant DTE speed AT command set enabled
DTE flow control RTS DTR disconnects
DCE flow control CTS DSR forced high
XON/XOFF pass through disabled DCD normal
Inactivity timer off CTS forced high
Break control 5 DTE fallback disabled
V.42 fast detect enabled Options retained at disconnect
SPEAKER OPTIONS
Vo l u m e l ow
On until carrier detect