User`s guide

Hardware Options
Modem 3600 E-29
Factory Option Set # 2
(Asynchronous Dial-up without V.42 bis Protocol)
(AT&F2)
MODEM OPTIONS TEST OPTIONS
DCE rate - 33600 Bilateral digital loop disabled
Modulation automode DTE local test disabled
V.34 rate threshold low * DTE remote test disabled
V.34 asymmetric rate enabled Remote commanded test enabled
Normal originate Test timeout off
Fast train disabled
Auto retrain enabled DIAL LINE OPTIONS
SQ auto rate disabled Tone dial
Transmit clock internal Auto dial #1
Dial line Wait for dial tone
Jack type RJ11 Wait delay 2 seconds
Line current disconnect long Pause delay 2 seconds
Long space disconnect enabled Call timeout 30 seconds
V.22 guard tone disabled Answer on 1 ring
Autocallback disabled
PROTOCOL OPTIONS DTE OPTIONS
LAPM protocol disabled * Async data
MNP protocol disabled * DTE rate - 115200
Normal buffer mode * 8 bit, no parity
Constant DTE speed Async controlled dialer
DTE flow control disabled * AT command set enabled
DCE flow control disabled * DTR disconnects
XON/XOFF pass through disabled *DSR forced high
Inactivity timer off DCD normal
Break control 0 * CTS forced high
V.42 fast detect disabled * DTE fallback disabled
Options retained at disconnect
SPEAKER OPTIONS
Vo l u m e l ow
On until carrier detect
*
Indicates variation from factory option set #1